-
+48 12 350 13 50
Mon-Fri, 8AM - 6PM
Transformer stations in container housing
mobile transformer stations
Transformer stations
in container construction
Transformer stations have many possible applications depending on the size and power of individual units. Elsta offers transformer stations with a capacity of up to 2000 kVA in container construction based on a metal structure. It is possible to make a transformer station up to 10 MVA.
We make transformer stations according to individual needs, which, apart from the technical specification, also include personalization of the station marking in accordance with the visual identification of the Client. We provide an optimal solution dedicated to specialist needs.
Specification of the transformer station
in a container structure
TRAFO station
Standard configuration
MV switchboard configuration
- up to 4 fields in any configuration
metering field adapted to the connection conditions and the OSD operator
telemechanics and DC power plant (min. 8h backup) integrated in the MV switchboard
possibility of installing or replacing the switchboard through the door, roof and side wall
compliance of the applied equipment with IEC 60947-2
Parameters:
- Insulation voltage 24 kV
Short-circuit current 16 kA/1s
Rated current 630A, 800A, 1250A
It is possible to make a transformer station up to 10 MVA
LV switchboard configuration
- up to 10 outflows equipped with fuse switch disconnectors
stripped switch disconnector with fuse inserts and surge arrester for industrial applications
possibility of installing or replacing the switchboard through the door or roof
insulation control in industrial design for IT networks in standard
circuit breaker or switch disconnector at the inlet of the LV switchgear,
possibility of expanding the LV switchgear with a field supplying the energy storage
Parameters
- Insulation voltage 1 kV
Short-circuit current 25 kA/1s
Rated current 1000 A or 1600 A
Dry or oil transformer
- up to 1000 kVA for voltage 0.4 kV • up to 2000 kVA for voltage 0.8 kV
possibility of installing or replacing the transformer through the door or roof
control of the transformer winding temperature
oil pan when using an oil transformer
Other elements of the transformer station
- meter board in accordance with the requirements of the connection conditions and the OSD operator
fans with temperature control for maintaining a constant temperature during the summer period
heater with temperature control for maintaining a constant temperature during the winter period
Construction
Housing (two independent elements)
1. Foundation (cable basement)
- fully sealed,
a barrier against water from the outside,
protects any oil leakage when using an oil transformer.
2. Container
foldable single-pitch roof,
floor insulation made of multi-layer board to ensuremaintaining a constant, internal temperature, which also protects against rodents,
temperature monitoring inside and outside.
Interior
- transformer compartment (up to 2000 kVA),
- medium and low voltage switchgear compartment,
- internal corridor for service.
Comunication
Ethernet (ModBus TCP/IP) IEC 61850
Safety
Bezpieczeństwo obsługi i instalacji
system kontroli pracy baterii BMS, system Alarmu Pożaru, system gaszenia gazem inertnym
Certificates
- power electronic systems: RfG 2016/631
- battery banks: PN-EN 62281, PN-EN 62619
- technical containers: PN-EN IEC 62933-5-2, PN-EN 62262:2003, PN-EN 60529:200
- fire resistance class: REI60
- high degree of protection: IP54 or IP55
- lithium cells in safe and proven LFP technology
Download
Układ 3-fazowy, 50/60 Hz,
napięcie nN do 800 V lub SN do 20 kV
Energia nominalna do 1 MWh
Klasa ochrony obudowy
wg EN 60529 IP 54
Waga całkowita od 8 do 28,3 ton
Baterie Li-Ion LFP
Liczba gwarantowanych
cykli do 6000
Komunikacja
Ethernet (ModBus TCP/IP)
IEC 61850
Bezpieczeństwo
system kontroli pracy baterii BMS,
alarm pożarowy, gaszenia
gazem inertnym
Pełna dokumentacja, uruchomienie
i rozruch wsparcie logistyczne,
techniczne i posprzedażowe, serwis
Advantages
of the transformer station manufactured by Elsta
- the station has been fully tested by the Electrotechnical Institute for compliance with the PN-EN 62271-202 standard and has a type examination certificate.
- fully sealed cable basement
- temperature monitoring inside and outside
- devices adapted to the connection conditions and the OSD operator
- possibility of installing or replacing devices through the door, roof and side wall,
- compliance of the applied equipment with IEC 60947-2
- easy access for service to perform any repairs and periodic inspections
- any configuration of MV and LV switchboards
- transport of the station with a transformer installed inside
- connection of the energy storage
- installation of the CCTV system
- installation of the reactive power compensation system
- monitoring of the parameters of the station and devices connected to it
- installation of measurement of the generated electricity
- use of a power quality analyzer in full class A
Main areas
of application
Transformer stations have many possible applications in the power generation (mainly RES) and distribution sectors. Elsta offers typical transformer stations with a capacity of up to 2000 kVA in container construction based on a concrete or metal structure. It is possible to make a transformer station with a capacity of up to 10 MVA.
We make transformer stations according to individual needs, which, apart from the implementation of the required technical specification, also include personalization of the station marking in accordance with the visual identification of the Client. We provide an optimal solution dedicated to specialist needs.
Transformer stations manufactured by Elsta are used in distribution power and RES installations, ensuring safe and stable operation on facilities.
Related Products
Transformer stations
in concrete housing
A transformer station in concrete housing is a structure of high durability and safety, providing protection of electrical devices against mechanical damage and weather conditions.
Low voltage switchgears
LV
Low voltage switchgears (below 1000 V) are key elements of electrical infrastructure. They are used to distribute energy and/or to supply and control separate drives or other electrical devices.
Medium voltage switchgears
MV
Medium voltage switchgears are another key element of electrical infrastructure. Their rated voltage is usually a voltage from 1 kV to 36 kV, depending on the classification.
Contact us
We will be happy to answer your questions
and select the right solution for you.
Operating since 1988, Elsta provides comprehensive solutions in the areas of electrical engineering, automation and energy, implementing projects both in Poland and on foreign markets around the world.
Discover our products
Elsta sp. z o.o.
32 Janińska St., 32-020 Wieliczka, PL
CALL US
+48 12 350 13 50
general e-mail office@elsta.pl
e-mail for offer inquiries rfq@elsta.pl
A company registered in the District Court for Kraków Śródmieście in Kraków, XII Commercial Division of the National Court Register KRS 0000100416 REGON 356526640, NIP 6831865970, BDO 000068605,
Share capital PLN 295 100.00 fully paid up.
We will be happy to answer your questions
and help select the right solution,
please contact us.
OR CALL US
+48 12 350 13 50
Elsta sp.z o.o. © 2025